• Frame, Basket, & Wheels
• Toddler Seat & Canopy
• Bumper Bar
• Toddler Seat Rain Shield
• Toddler Seat Bug Shield

CLEANING:

• Clean frame with a damp cloth and a mild detergent; dry thoroughly. DO NOT use abrasives.
• If the pushchair chassis parts have been exposed to salt water we recommend that they be rinsed with fresh (tap) water as soon as possible to avoid corrosion. Always dry frame if wet.
• All fabrics are removable.
• Spot clean or hand wash in cold water with mild detergent. Dry flat and away from direct sunlight before re-use or storage. DO NOT bleach, iron or dry clean.
• To extend the life of your Cruz’s fabric, keep it clean and do not leave it in direct sunlight for long periods of time.
• DO NOT fold or store the Cruz if it is damp or wet, nor store in a damp environment.

MAINTENANCE AND REPAIR:

• This pushchair requires regular user maintenance. Regularly check all connecting hardware (rivets, screws, etc.) for tightness and security.
• Inspect your Cruz periodically. Seek prompt repairs, replacing worn or broken parts as needed. Check all safety devices, locks and harnesses for correct and secure operation. Never continue to use a product that is structurally unsound.
• Only UPPAbaby replacement parts should be used. It may be unsafe to use parts supplied by another manufacturer.
• Contact Customer Service with any repair questions at 844-823-3132 or email us at [email protected] .

The Cruz is compatible with the UPPAbaby Mesa infant car seat without the need for adapters. We create adapters for the following infant car seat manufacturers and models:

Chicco models: KeyFit and KeyFit 30 models.

Maxi-Cosi models: Mico, Mico AP, Mico NXT, Mico Max 30, Citi, Cabrio, and CabrioFix. NOT COMPATIBLE WITH Maxi-Cosi Prezi.

Also compatible with Nuna Pipa and Cybex Aton, Aton 2, and Aton Q.

No updates have been made for 2019.

2017 to 2018 Cruz?

• The 2018 Cruz is offered in new mélange fashions and all fashions come with premium 100% full-grain leather accents.

2015 to 2017 Cruz?

• The 2017 Cruz has undergone fashion and textile updates. The UPF sunshade is now a silky, wrinkle-free material. Several fashions now come with 100% full-grain leather on both the handlebar and bumper bar.

There are five recline positions ranging from upright to fully reclined.

2017-LATER models: The Toddler Seat is polyester. The padding is made of polyurethane foam. All 2018-LATER models include a 100% full-grain leather handlebar and bumper bar.

2015/2016 model: 600D Nylon

• The Cruz has a more compact and lighter frame design.
• The Cruz can only hold one seat while the Vista offers many double configuration options.
• The Vista comes with a Carrycot, but the Carrycot is sold separately with the Cruz.

The Travel Bag Accessory is recommended for air travel. By registering your pushchair and Travel Bag, our TravelSafe program covers any damage incurred to your pushchair during air travel

 Click here to view the Travel Bag accessory.

1. Pull down harness pad
2. Detach metal ring from webbing loop

Watch this video to learn how to remove and attach the Cruz canopy fabric.

1. Unroll and unzip Travel Bag, laying the bag out flat with flap open.
   NOTE: Remove blue foam block from inside Travel Bag if you have the 2017 model.
2. Fold pushchair with Toddler Seat facing forward in 2nd most upright position. Fold seat footrest to a 90° angle.
3. Remove rear wheels. Face wheel posts towards each other and stack so that posts poke through each wheel spoke. Slide into wheel storage bag and fasten top adjustable closure flap.
4. Remove bumper bar and place in the pouch located inside the Travel Bag.
5. Put folded Cruz Pushchair into the Travel Bag.
6. Place wheel storage bag on top of pushchair seat.
7. Zip Travel Bag to close

• Activate brake to prevent pushchair from rolling forward while folding.
• Engage button on top of handle bar and extend to highest position. 
  NOTE:Handle must be in highest position and seat must be forward-facing for pushchair to stand when folded.
• Place index fingers on both slide release triggers and slide upward until frame begins to fold.
• Once pushchair begins to fold, hold handle bar with right hand and reposition left hand onto back leg.
• Continue to fold pushchair until latch on left side has engaged. Pushchair will stand when folded.

• Pull on the end of the webbing to tighten the straps and pull up on the top loop to loosen.
• To adjust the shoulder height position, detach the grey adjustment clip from the harness attachment loop. Reattach clip to the desired harness loop that fits best for your child.

To watch a video, go here.

Yes, you must remove the Mesa V2 before folding the Vista, Cruz, Ridge or Minu pushchair.

Yes, you must remove the Mesa before folding the Vista, Cruz, Ridge or Minu pushchair. 

The Serial Number is a long string of characters located on a sticker with a barcode on the right of the pushchair frame above the basket.

Yes, the Cruz seat easily can be reversed to be forward or parent-facing.

Running is not recommended with the Cruz or Vista.

Yes! You can easily upgrade your 2015-later Cruz with our accessory covers, constructed of the same premium, full-grain leather as our standard leather accents. They can be purchased in Black or Saddle, and easily zip over non-leather Cruz handlebars and bumper bars to add a rich and classic look.

The Cruz is suitable from 3 months to 50 lbs. It can be used from birth only with the Infant SnugSeat or Carrycot accessory.

2017-LATER: The Cruz wheels are made of solid Polyurethane, providing durability for a cushioned stroll on any ground surface. 

2015/2016: The AirGo patent-pending wheels mimic the cushioned ride of an air-filled tire with the lightweight benefit of foam, providing the ultimate in shock-absorbing performance with tires that never go flat!